Grizzly H6070 1" X 30" Belt/5" Disc Sander Product Description:
- 1/3 HP, 110V, single-phase, 3450 RPM motor
- Both belt and disc sanding tables tilt 45 degrees
- Belt sander table size, 5-1/8" x 5-1/8"
- Disc sander table size, 4" x 7-5/16"
- Removable belt platen and idler roller guard
Product Description
This combination benchtop sander offers a 1" wide by 30" long belt sander and a 5" disc sander in one portable unit. Ideal for sanding intricate parts, contour sanding and dry sharpening, this sander pretty much does it all. Both the belt and disc sanding tables tilt 45° for added versatility and the removable belt platen and idler roller guard make contour sanding a breeze. Features: • Motor: 1/3 HP, 110V, single-phase, 3450 RPM • Tables tilt: 45° • Belt sander table size: 5-1/8" x 5-1/8" • Disc sander table size: 4" x 7-5/16" • Platen size: 1" x 3" • Tracking adjustment • Direct drive • Two dust ports: 1-3/4" each • Takes standards 1" x 30" belts and 5" PSA discs • Approximate shipping weight: 22 lbs.
Customer Reviews
Most helpful customer reviews
32 of 33 people found the following review helpful.
By Camper, Hiker, fisherman.
I bought this for spare time hobby knife-making. It's awesome. I haven't yet been able to choke out the motor and get it to stop by pressing too hard on the belt. I used a little delta of about the same size at a friend's house, and though it also performed admirably, it reached it's maximum torque frequently.There's some plastic on this thing that you'll want to be careful with. It will break. The moving parts--motor, etc--are all metal. but the tightening wheels and levers are a sort of heavy duty plastic that you'll break off if you push them too hard. Be cautious, and they will last forever. Even if you break them, you can still use the very solid metal bolt that the plastic attaches to, it just won't be as convenient.I was surprised that it came with a belt and sanding disk so I could plug it in and try it out immediately. Lots of power, and it's nice and quiet, as well as well-balanced. It doesn't shake or rattle, just purrs. This unit only weighs about 20 pounds, but its enough to hold it steady, which is a must for me, since I have no work bench, and must move this outside to use it, then move it back inside to keep it dry.A wider belt is much better for most types of sanding, but honestly, if you pay attention to what you're doing, and space is an issue (as well as cost) this little belt/disk sander is pretty amazing. I would highly recommend this hobby sander to anyone.
20 of 21 people found the following review helpful.
By RHB Thomas
I have been using the Grizzly belt/disc sander for a month and find it superior to the two others I used before. The problem with most of the belt/disc sanders is that you cannot get parts for them (especially the motors). The Grizzly belt/disc sander is well built and sturdy to stand up to daily, hard use. It is the perfect size to use for small items that need to be sanded. I have also found it to be excellent to sharpen knives and sharpen lathe tools. I use a leather belt to finish sharpening. So far I am pleased with the product and I am enjoying the results.
9 of 9 people found the following review helpful.
By Harrison
Arrived quickly. I found it a little lighter weight than expected. The tilt table for the belt sander was some what flimsy. As noted in previous reviews the plastic handle to tighten the tilt base feels like it will break if your not careful. The belt platen doesn't line up. I used it to sharpen chipper blades with the addition of some fine grit and a leather belts. The blades seem sharp but haven't tried them in the chipper yet. I'm looking forward to sharpening knives and chisels. I'm sure it will be useful for other projects in the shop.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!