Compare Curt Manufacturing 13702 Class III Receiver

Buy Curt Manufacturing 13702 Class III Receiver

Curt Manufacturing 13702 Class III Receiver Product Description:

• 2" Receiver Tube Opening
• Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Limited Lifetime Warranty to original purchaser

Product Description

All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Photos are misleading
By Shayne
I purchased this receiver to put on my rv for a bike carrier. It is very heavy and well made so i don't have to worry about losing my bikes while going down the highway. The box that it came in was way to big so the thing had slid around in the box quite a bit causing a lot of tears and holes in the box. Lucky the none of the hardware was lost. My only complaint is that the photos are not clear on how this thing is adjustable. After looking on the curt website i realized that the photos are of several different receivers. If you have to adjust the hitch smaller then the frame tube will extend past the brackets that bolt to the vehicle frame and in some cases i would think they may need to be cut off. New holes would have to be drilled as there is only one set at the very end of the frame. Point being it is adjustable but with a considerable amount of additional work. Overall am pleased with the product.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Curt Manufacturing 13241 Class III Receiver

Buy Curt Manufacturing 13241 Class III Receiver

Curt Manufacturing 13241 Class III Receiver Product Description:

• 2" Receiver Tube Opening
• No drilling required
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Made in USA. Limited lifetime warranty to original purchaser

Product Description

All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Customer Reviews

Most helpful customer reviews

2 of 2 people found the following review helpful.
Curt hitch receiver 13241 - Class III -
By Simon R. Mouer
This review is for the Curt receiver 13241 application to my 2012 Nissan Frontier Crew-Cab Long-bed SL.I cut the box the receiver came in to lay flat so I could use it as a mat to lay on.This is my second Curt hitch receiver. The first was for a Mazda Tribute. As expected, this receiver is massive, accurately made, and finished well with a thick coat of black powder coat.This is a heavy item (for me) weighing in at 45 pounds. Still, it was easy to put on by myself, and I am 70+ years old. The bolt holes were accurately drilled, and the Nissan came with weld nuts already in place. The six bolts came with thick conical washers, which are designed to exert pressure on the bolts as they are tightened. All it took was lining up one bolt hole and start a bolt, then do one bolt on the other side. The rest is easy. Probably the hardest part, besides getting the first bolt on, was torquing the bolts to 65 foot-pounds. There was one bolt partially obstructed by the exhaust pipe, that required a knuckle joint on the socket wrench.That's all there was to installation. the only tools you will need are a 3/4" socket and driver (or 19mm), a 6" extension bar for the socket, a knuckle joint, and a torque wrench set to 65 foot-pounds. You could just use a 3/4" (19mm) box wrench.On the Nissan Frontier, the receiver was jut a little inside the rear-most edge of the rear bumper, with maybe less than 1/2" clearance below it. I set a 2" hitch into the receiver with no problem. However, a Texas "tailgate" hitch cover, which extends 3" beyond the hith cove shaft, would not fit because the rear edge of the bumper interfered (the receiver was recessed a little too much under the bumper.)All-in-all, the Curt hitch receiver more than met my expectations, and I would recommend it to my friends.

2 of 2 people found the following review helpful.
Great Deal.
By R. Clark
Nice Hitch. The dealer wanted 2.5 times the price plus an hour labor. Same item. Took ten minutes to put on. Fits the 2012 Frontier, although when I bought it, it only said up to the 2011.The bolts are stuffed in the frame. Initially thought they forgot them.

2 of 2 people found the following review helpful.
great hitch
By skyflier
This Curt hitch fit my 2012 Frontier perfectly, it has a very nice powder coat shiny black finish and installed easily in about 5 minutes. Highly recommended!

See all 29 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Cheap Curt Manufacturing 13132 Class III Receiver

Buy Curt Manufacturing 13132 Class III Receiver

Curt Manufacturing 13132 Class III Receiver Product Description:

• 2" Receiver Tube Opening
• No drilling required
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Made in USA. Limited lifetime warranty to original purchaser

Product Description

All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
Nice product
By Patrick E. Goodwin
Got this so I could tow with my vehicle.Goes on without a problem and looks very nice and quality made.Got some other stuff to go with it by the Curt Manufacturing brand and would seriously buy this brand again.

1 of 1 people found the following review helpful.
What can I say?
By the bale dude
This was new (or open box) and complete, including the instructions. No defects, it fits the vehicle perfectly, and the shipping was rapid-fire, although the packing did leave something to be desired. But all in all I'm very pleased.

1 of 1 people found the following review helpful.
Easy to install
By James F. Katkus
A great price for the do-it-yourselfer. Minimal mechanical knowledge and tools to save big $$$

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Price Compare Curt Manufacturing 13042 Class III Receiver

Buy Curt Manufacturing 13042 Class III Receiver

Curt Manufacturing 13042 Class III Receiver Product Description:

• 2" Receiver Tube Opening
• No drilling required
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Made in USA. Limited lifetime warranty to original purchaser

Product Description

All CURT hitches feature WeatherTite construction, which prevents rusting from the inside out by sealing the main body of the hitch. The receiver tube has an open back end to allow for easy cleaning and for dirt and moisture to pass through and not get trapped as is common with other brands of hitches. All CURT hitches come with mounting hardware and installation instructions. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish, which is baked on for a high-gloss, smooth surface. CURT trailer hitches are simply the most attractive, most durable and toughest hitch on the market. You won’t find better quality and value anywhere!

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Perfect fit!
By deborah robertson
Very high quality unit. On my 95 silverado, I did NOT have to lower the spare either. This is a direct fit no drill piece.

0 of 0 people found the following review helpful.
Towing package
By Dave
I bought a trailer (5x8) and decided to get this. I am happy with the purchase, I installed it myself (66 years old).

0 of 0 people found the following review helpful.
Perfect Fit
By Walter H. Jordan Jr.
This hitch receiver installed like it was designed to fit. No issues at all. Very nice paint finish. Strong and sturdy. Installed it by myself in less than 30-minutes. Everything aligned. Very well satisfied.

See all 8 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best J-4000DM Jiffy Drapery Steamer with Metal Steam Head and 7.5 Foot Hose Attachment

Buy J-4000DM Jiffy Drapery Steamer with Metal Steam Head and 7.5 Foot Hose Attachment

J-4000DM Jiffy Drapery Steamer with Metal Steam Head and 7.5 Foot Hose Attachment Product Description:

• 1500 watt incoloy heating element (120 volt for North America use only)
• Die cast aluminum housing
• Preheat and Steam Settings
• 2 Hour steam time per filling
• 7.5-foot hose with high impact plastic 6-inch wide steam head

Product Description

J-4000DM Jiffy Garment Pro-Line Steamer with Metal Steam Head/7.5 Foot Hose Attachment and 3-Pronged Grounded Cord Set.

Customer Reviews

Most helpful customer reviews

0 of 7 people found the following review helpful.
jiffy steamer
By Thomas Nihan
The Jiffy Steamer arrived on time and is a great product! It works as promised and I am very satisfied with it!

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discount Bosch 1806E 6-Inch Angle Grinder

Buy Bosch 1806E 6-Inch Angle Grinder

Bosch 1806E 6-Inch Angle Grinder Product Description:

• 2-Position Vibration Control Side Handle - Reduce Vibration up 60% for increased comfort and less fatigue
• Directed Airflow - Unique design diverts dust away from switch and vital components
• Epoxy Coated Field Windings - provides ultimate protection against abrasive dust and debris
• Sealed Switch - Keeps debris out of the switch mechanism and extends switch life
• Service Minder Brushes - Eliminates guesswork, stops the tool when preventative maintenance is required

Product Description

114-1806E Features: -Service Minder brushes - eliminates guesswork, stops the tool when preventative maintenance is required.-Spindle lock - for quick wheel changes.-2-Position auxiliary handle - specifically designed and angled to a ''natural'' position for maximum comfort and control.-Double insulated.-Spindle lock for quick wheel change.-Sealed switch - keeps debris out of the switch mechanism and extends switch life.-Epoxy coated field windings, provide ultimate protection against abrasive dust & metal debris.-Tool free adjustable guard, quick installation and adjustments.-AC/DC capability - extends the versatility of the tool by working from DC outlets such as welders and generators.-Constant-Response circuitry provides soft-start, maintains constant speed under load, and provides overload protection.-Spindle Thread: 5/8 in - 11.-Testing and approvals:.-Complies to OSHA.-UL listed.-Double insulated, UL listed, complies to OSHA. Specifications: -Voltage: 120.00 V.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Awesome Angle Grinder - Bosch Quality
By Toby Crafford
Had a 4.5" Craftsman to die mid-project - Bought the 1806E-6 for a good deal. 12 amps gives GREAT power! Cuts like butter AND is not heavy. I think this is a great mid-range model - not too big nor too small. Used it to cut CMU (hollow and filled), concrete, rebar, WWM - all with the greatest of ease. Can't go wrong with this model.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discount ROCKFORD 1000W MONO CAR AMP

Buy ROCKFORD 1000W MONO CAR AMP

ROCKFORD 1000W MONO CAR AMP Product Description:

• 1000 Watts Amplifier
• Class D Monoblock (1 Channel) Amplifier
• Rockford Fosgate amplifiers have always been conservatively rated, and the T10001bd is certainly no exception
• A large capacitor is recommended.

Product Description

1-ohm stable, 1000 watts RMS x 1 at 1 ohm, Para-Punch™ bass EQ, Class bd technology, fan cooled.

Customer Reviews

Most helpful customer reviews

5 of 5 people found the following review helpful.
Great AMP. Blows Kicker outta the water.
By Locksmith Dan
Went from having a Kicker ZX 1000 Watt Mono to Rockford. Was very skeptical at first, but let me tell you...It blew my expectations out of the water. It's the best amp i've ever owned. Solid, heavy, huge gain, huge sound. I'm slappin 2 12" Kicker VX with this amp @ 1 ohm. Killer, just killer. I could blow some serious ear drums with a quick bass test from this great amp.Rockford is the way to go, never knew an amp could be so powerful. Mine BTW was rated at 1242 RMS...tested [per birthsheet]

4 of 4 people found the following review helpful.
The Best Bang for the Buck!!!
By D. Eisner
I had a Fosgate 401s and it could not handle my two Alpine Type-R 12's at 1ohm and a friend of mine has the t10001BD hooked to two Solo Baric L5 15's and it pounded so hard I knew this was a good amp. For such a low price for sooo much power it is the best deal. Turning heads all day long.

1 of 2 people found the following review helpful.
The best in its class!!
By Hibrahiny Santiago
It is the best brand, i'm a prosfessional audio car installer. You won't be disapointed with this AMP.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!